- | P a g e
MILLWRIGHT EXAM NEWEST 2024-2025 ACTUAL
EXAM COMPLETE 200 QUESTIONS AND CORRECT
DETAILED ANSWERS ( VERIFIED ANSWERS )
|ALREADY GRADED A+
Machine with soft foot that is bolted down firmly in a machinery train can - ANSWER- Distort the operation of the machine train
The coupling that has two halves with external teeth in a sleeve with internal teeth is the ____coupling - ANSWER- Gear
Some forming will be disagreeable and hard to get along with.As an apprentice, the best way to deal with this is to_____. - ANSWER- Try to get along with the foreman, Work hard, and follow the Formans instructions
Lateral alignment can change very easily - ANSWER- During shimming
Oh mechanical tachometer is used on machinery that rotates at less than ______ rpm - ANSWER- 10,000
- / 3
- | P a g e
Under misaligned conditions couplings can _____ to the shaft ends - ANSWER- Transmit strains
Fiberglass packing material works well in temperatures up to____ - ANSWER- 1000°F
To check an instrument for parallax, ______while looking at the cross hairs - ANSWER- Move your head slightly
The rubber lined pump is characteristically used with slurries that have particles - ANSWER- Less than 1/4 inch in diameter
A special skill that is divided into 10 ,20,30,40,50 or 60 parts is a ______ scale - ANSWER- Engineers
The most effective hearing protection is provided by - ANSWER- earmuff-type hearing protectors
Type of gear pump that uses two identical gears much together is the _____ gear pump - ANSWER- External
Most hydraulic fluids are - ANSWER- Petroleum oil based
- / 3
- | P a g e
The two types of chemical dryers used in compressed air systems are the deliquescent dryer and the ______ dryer - ANSWER- Desiccant
If the discharged air of a reciprocating compressor is below its rated capacity, A possible cause maybe - ANSWER- Worn rings on the piston
The most common way to remove bearings is to use - ANSWER- A bearing puller
The type of packing that consist of layers of packing material between layers of rubber is - ANSWER- Laminated
A heili-coil is used to - ANSWER- Replace damaged threads in a bolt hole
In a standard proportion for chain manufacturing the chain with is approximately _____ of the chain pitch - ANSWER- 5/8
No matter what does scale of the drawing the dimensions are always - ANSWER- The actual size of the object
- / 3
